Products

                                                Polyhouse

 Features of this structure

1. Tropical Design : Column runs up to top of the Greenhouse to ensure maximum strength to the structure.



    




2. Anchoring Foundation Coloumn: Formation level of Greenhouse are perfectly maintained in concrete ensures resting of main column on concrete.


    



3. G.I. Pipes structure with Hinge Joint: G.I. Pipe members are joined to each others by means of clamps, angle brackets & nut bolts which ensures more strength against the vibrations caused by wind.



                


4. 8 mtr. X 4 mtr. Structure Grid : Multispan structure having 8 mtr. truss span and 4 mtr. distance between two trusses.



                



5. 10% Top Ventilation : 800 mm clear opening placed at top to ensure better ventilation and 600 mm overlap to avoid direct entry of sunlight into Greenhouse.

 

                          Technical Excellency of IGPL

 

  

  Foundations : Foundations are aligned by theodolite and dumpy level. Level of concrete are maintained as   per the slope required resulting proper resting of main column on the concrete.

  Bottom Chords : Straightness of the bottom chord is maintained for any length of the Greenhouse by    means of perfect mathematical calculations, resulting more strength & good aesthetical appearance to the   structure.

  Ideal selection of Radius for Top Arches : IGPL has selected optimum radius for top chords which results in      to less wind pressure through vents and avoid lifting of top polythene and also reduces wind pressure due to       aerodynamic design.

Flap Control & Curtain Runners : IGPL provides flap control pipe that avoids the flapping of curtain paper & reduces maintenance due to wind pressure. Extra purlin is provided along periphery with aluminum gripper which increases strength of structure and also increases life of side polythene.



                  

  Aluminum Gripper : Curvature at the bottom surface for perfect fitting on the pipes and radius is given to the edges where polythene under stress.

Gutter : Trapezoidal shaped gutter in single piece made from G.P. sheet coil and are placed on the structure by means of modern technology.



                  


Fixtures : Clamps are made from hot galvanized sheet, hot galvanized nuts & bolts are used for connection of the

 

 

 

                              

 

 

                      Fan & Pad Greenhouse

 

• Stub type anchoring foundations.
• Multi span structure with 8.0 mtr. x 4.0 mtr. 
• Grid.
• Tunnel type total galvanized and nut bolted 
• structure with single piece gutter.
• 4.0 mtr Gutter height & 6.0 mtr ridge height 
• from
• ground formation level.
• Fan : 50” Box fan having 21000 CFM air
•  exhaust
•  capacity with SS blade & plastic louvers.
• Cellulose cooling pads: 100 - 200 mm thick.
• Humidity and Temperature will be controlled with
•  sensors.
• One air change is made within 60 seconds.
• Inside air velocity is maintained up to 0.9 mtr / sec.

              

 

                                            Shadehouses

 

FLAT Type Shadehouse

• Stub type anchoring foundations.
• Flat roof structure with 6.0 mtr. x 6.0 mtr. Grid.
• Total galvanized and nut bolted structure.
• Total Structure height will be 4.0 mtr.
• 2.0 mtr wide corridors along all periphery.
• Stub type anchoring foundations.

 

 

 

 

 

ROUND TOP Type Shadehouse

• Stub type anchoring foundations.
• Round top roof type structure with 6.0 mtr. x 4.0 mtr. Grid.
• Total galvanized and nut bolted structure.
• Side height of Structure will be 3.0 mtr.
• Total / Ridge height of Structure will be 4.0 mtr.
• 2.0 mtr wide corridors along all periphery.